PPG High Performance Coatings
Menu
Print |

By Brand

AQUAPON® 35 Polyamide-Epoxy Gloss

Recommended for heavy duty service in corrosive industrial atmospheres where a tough, impact, abrasion and mar-resistant coating is needed. Apply over properly prepared and primed steel, galvanized steel or aluminum. Also recommended for use on masonry surfaces, including plaster walls, cement composite board and concrete block.

AQUAPON® 35 Polyamide-Epoxy Gloss Bases

AQUAPON® 35 Polyamide-Epoxy Gloss is recommended for heavy duty service in corrosive industrial atmospheres where a tough, impact, abrasion and mar-resistant coating is needed. Apply over properly prepared and primed steel, galvanized steel or aluminum. Also recommended for use on masonry surfaces, including plaster walls, cement composite board and concrete block.

AQUAPON® High Build Semi-Gloss Polyamide-Epoxy Coatings

AQUAPON® High Build Semi-Gloss Polyamide-Epoxy Coatings are high build, corrosion resistant finishes that have excellent hardness, abrasion and mar resistance and outstanding adhesion qualities. They are recommended for heavy duty service in corrosive industrial atmospheres. The 97-130/97-139 are recommended for some immersion service when applied over properly prepared and primed steel. Also can be applied over hot dipped galvanized steel, aluminum, masonry, well-cured plaster, cement fiberglass composite, wood or concrete.

AQUAPON® LT NSF Low Temperature Epoxy Coatings

AQUAPON® LT is an NSF approved low temperature two component epoxy coating. The AQUAPON LT coatings are compliant to NSF 61 standard for potable water tanks, piping, values and fittings. Contact PPGAF Technical Service. This product can be applied 5 to 7 mils per coat up to 18 mils maximum DFT using any combination of colors. AQUAPON LT can extend the coating period for cold climates and is recommended for application on damp surfaces and for jobs where a fast recoat is required.

AQUAPON® Polyamide-Epoxy Coatings

Recommended for heavy-duty service in corrosive industrial environments over properly prepared and primed steel, galvanized steel, aluminum, copper and brass. Also recommended for use on masonry surfaces, plaster walls, drywall construction, cement-fiberglass board, wood, and concrete block where a tough, impact resistant coating is needed. Recommended for use as a floor finish in heavy traffic and chemical spill areas.

AQUAPON® WB Interior Floor Coating

AQUAPON® WB Interior Floor Coating is a complete floor topcoat or it can be used as a sealer and dust-proofer for interior concrete floors in industrial environments. It provides a tough, chemical resistant finish with excellent hardness in addition to abrasion, mar and stain resistance. Reduces maintenance costs by reducing dusting and wear on concrete floors. Use as a clear topcoat over a wide variety of water borne or alkyd floor coatings or marking paints.

AQUAPON® WB Water Base Epoxy

AQUAPON® WB is a water-borne epoxy interior/exterior coating system for use in commercial, institutional or industrial environments or where a tough, impact, abrasion, mar and stain resistant coating is required. Suitable for use on properly prepared and primed steel, galvanized metal, aluminum, copper, plaster, concrete, masonry, and wood surfaces. Also recommended as a floor coating.

AQUAPON® WB Water Base Epoxy Primer

AQUAPON® WB primers are the primer complement to the AQUAPON WB Water-Borne Epoxy interior/exterior coating system. These products are intended for use in commercial, institutional or industrial environments or where a tough, impact, abrasion, mar and stain resistant coating is required. Suitable for use on properly prepared and primed steel, galvanized metal, aluminum, copper, plaster, concrete, masonry, and wood surfaces.

AQUAPON® Zinc Rich Primer

Sacrificial primer for abrasive blasted steel, especially in fresh or salt water service. This product is also recommended for field touch up of shop applied inorganic zinc primers prior to application of high performance topcoats.