PPG High Performance Coatings
Print |


PITT-GUARD® Rapid-Coat

Direct-to-Rust Epoxy Mastic Coatings

PITT-GUARD® Rapid Coat Direct-To-Rust Epoxy is intended for interior/exterior use where barrier type protection is required for steel, aluminum, hot dipped galvanized steel and masonry surfaces. It's excellent wetting properties allow application and good performance over tightly adhering rust. Excellent performance is obtained over abrasive blasted surfaces.

Special Considerations

  • *Colorants added to this base paint may increase VOC level significantly depending on color choice.


  • Perfect for a variety of corrosive and non-corrosive environments
  • Barrier coat corrosion protection
  • Excellent adhesion to minimally prepared surfaces
  • Virtually infinite color capability with PERFORMACOLOR® system
  • No topcoat needed for corrosion protection

Recommended Uses

  • Aluminum
  • Concrete
  • Hot Dipped Galvanized Steel
  • Steel

Available Sheens:

  • Semi Gloss

Available In:

Technical Data Sheets



Sheen Product Number Base Size MSDS
Semi-Gloss 95-249SC Component B Curing Agent Gallons, Fives MSDS


Sheen Product Number Base Size MSDS
Semi-Gloss 95-2400 Neutral Base Gallons, Fives MSDS
Semi-Gloss 95-2402 Yellow Base Gallons, Fives MSDS
Semi-Gloss 95-2412 White Base Gallons, Fives MSDS
Semi-Gloss 95-242 Inhibitive Red Oxide Gallons, Fives MSDS
Semi-Gloss 95-245 Porcelain White Gallons, Fives MSDS
Semi-Gloss 95-247 Cream Gallons, Fives MSDS
Semi-Gloss 95-248 Medium Gray Gallons, Fives MSDS
Semi-Gloss 95-249 Curing Agent, Component B Gallons, Fives MSDS